Deko-light Plano Linear LED Lighting Systems

Deko-light Plano is a range of aluminium extrusions designed to provide a totally flexible solution for any internal application, wall mounted/ceiling mounted or suspended. Can be cut to size up to a max of 2.5m (l), and longer lengths can be connected together to create a seamless linear solution. LED stripes are inserted top, bottom or both with slim drivers positioned inside the extrusions. Diffusers finish the product top and bottom.

Product Type

Ceiling Mounted, LED Stips, Pendant, Wall Light

Catagory

Office

Emision

Single, Dual, Single or Dual

IP Rating

IP20

CRI Ra (Colour Rendering Index)

>90

Colour

Aluminium, Black

Technical Specification

Plano enables the selection of various components to your requirements by following the below steps:

  1. Select the extrusion that best suits your application. Choose from wall mounted or surface/suspended.
  2. Select the diffuser which you prefer. Choose from Opal/prismatic flat or dropped diffuser in opal.
  3. Select your end caps to match the finish of the extrusion.
  4. Choose which LED strips you require, remember for dual emission you will require 2 x qty.
  5. Select the driver required (dependant on your choice of LED strip).
  6. When suspending the products you will require a suspension set.

And thats it, the extrusions are available in anodised aluminium or black finish (2m & 2.5m) and can be cut to length as required. They can be positioned so that they but together for longer continous installations, if required.

Other finishes are available to special order subject to qtys.

RGB / RGBWW / RGBNW or tuneable white stripes can be used, additional colour control equipment will be required and this and the drivers will need to be mounted remotely.

Alternatively, contact us for a bespoke specification for your project.

click here for accessories for Plano.

click here for LED stripes for Plano.

You may also like…